What are the best places to Cast the fishing rod?

2020 Big Quilcene River fishing report
September 7, 2020
2020 Minter Creek Fishing Report
September 19, 2020

Anyone can claim that pretty much any location is fine for angling. The fact that there are numerous kinds of environments and terrain you will face ideal places to pitch in your gear may not be so apparent but here are some of the most obvious.


Here are some places where you can cast your fishing rod:


At sea (surfcasting)

To practice surfcasting, you must use surf fishing rods with three parts, four and a half meters long and a semi-rigid tip. It shouldn’t be so mild, though, that heavy lead castings and bites aren’t unfortunate. The rods for this form of fishing are typical of three parts that can be plugged into, as they are the ones that can be more accessible to any fisherman and allow us to cast our bait further away from the shore. These, as we claim, are about four and a half meters long and allow us to make a lead throw with a weight of up to 250 grams.

You can also select two-section rods because their features are very interesting and the cast can be more than four meters long. Both types of rods are ideal when made of carbon fiber or fiberglass, the second material being the most recommended for inexperienced fishermen.

On the other side, the reels must be light but strong so that they give us the possibility of capturing different sizes. The brake must be at least twenty kilos in order to be able to adapt to any situation, whether fishing for a good bass or coping with algae snags on the bottom. The coil must have a large capacity to be able to install hundreds of meters of thread, an essential feature of surf casting.



Surfcasting reels are mounted in two ways:

  • On the one hand, one must have a braid of 0.06-millimeter mother line thickness and that can support up to 12 kilos.
  • On the other hand, they are assembled with 0.22 mm monofilament, although this depends a lot on the pieces that we are going to capture and the taste of the fisherman.

The types of lead that are used for angling vary according to the currents, but the most conventional are those of staples, pyramids, golf and casting. The choice will also be based on the distance at which the fish we want to catch are. For more on this topic be sure to check out this surf fishing rod and reel combo guide by outdoorpicked.




From Rocks (rock fishing)

A more specialized rod is needed to be able to practice this fun style of fishing. The ideal equipment consists of a spinning rod with a maximum action of 20 grams, measuring no more than eight feet. It should be as light as possible and have a capacity of up to 2500 mounted on the reel.

Hence, the reel must be as consistent with the rod as possible, so that the equipment is balanced. It should not be overweight, so it is easy to hold and pick up the instrument when a grab is made.



In Rivers and Reservoirs

Reeds made of light rods made of graphite or fiberglass are primarily used on this type of freshwater surfaces. One of the advantages of graphite is that it allows for greater sensitivity and can be adapted to fish that live in this type of water, which appears to be smaller than those that populate salt water.

A closed, rotating bait is used in fresh water, moved into rods about three and a half meters long. Fly fishing is another major style occurring in rivers and reservoirs. Carrying it out is an art and there is a lot of literature about it which gives us the most effective fly-fishing techniques.

The rods must be no more than 2,5 meters long. In the case of direct fishing, even longer rods, which are between five and seven meters long if possible, are needed. In this type of rod, the star material is carbon fiber.


From Boat

This method of fishing can be carried out both underwater and inland, but the method of rod that will be used in each case will vary, as the standards are not even comparable.

Thus, the most suitable options will be decided on the basis of the technique we will use, although we will highlight trolling fishing for fast and reasonable performance, where a powerful boat is required to drag the pieces in a simple way.

If you’re fishing in the coastal region, catching tuna and swordfish is the most popular thing. You need a rod that has a high capacity reel and a roller that can spin for this type of fish. The predominance of slow action rods is that they are ideal for having parts that swim to some depth.

This type of instrument is bent from the handle so that, by exerting force but without harming the fisherman, the fragments can be reached.


From Kayak

It is important that our rod is not more than two meters long to enjoy a good day fishing with a rod from a kayak. This is because the kayak itself must be able to meet the end of the rod, so any incident can be resolved without difficulty. There are individuals that use telescopic rods that, if appropriate, can be retracted to, for example, undo tangles or solve some other form of incident.

Tiny, solid and light should be the reel. You will have enough with a line of at least 150 meters, since in this form of boat in Europe it is only permitted to go deep into around 40-60 meters.


Leave a Reply